3 608 870 A47 Tightening Technology | Bosch Rexroth AG 41/263
Nexo cordless Wi-Fi nutrunner | 3 608 870 A47/2017-05
Fig. 3–2: Assignment of function keys and fields
The main menu can be accessed with the center function key.
As of Nexo firmware version 1200, the center position of the program selector triggers the screen of the
PLC input signals 0.3, 0.4 and 0.5 applied in the PLC module
tool screen on the tool display. Any input
signal can be applied. Refer to Input signals on page 74. The functional keys are then assigned the cor-
responding PLC signals.
Fig. 3–3: Function fields for program selector in center position.
Main menu
In menu Settings Tool display Main menu of the NEXO-OS operating system, the entries to be
displayed in the main menu of the nutrunner display are defined.
If you leave the display of the PLC signals, i.e. if the program selector is - from the center position - pushed
to the left and/or to the right, the 0.3, 0.4 and 0.5 PLC input signals applied in the PLC module
tool will
be reset. Even if the corresponding functional key is still operated.
On delivery of the Nexo cordless Wi-Fi nutrunner, some options in the main menu are already activated.
Please check carefully the options to be activated for the user to ensure optimum working conditions with
the Nexo cordless Wi-Fi nutrunner.
To Next Page
Loading...
