What to do if my Bosch Power Tool shows invalid tightening program?
If the program file loaded from the internal memory cannot be read, it means that the tightening program is invalid. Create a new tightening program or import tightening program again.
What to do if Bosch Rexroth Nexo shows servo amplifier incorrect input voltage?
If your Bosch Power Tool displays a servo amplifier incorrect input voltage, which is caused by a defective slide-in battery pack, replace the slide-in battery pack.
What to do if the Bosch Rexroth Nexo cannot read the gauge bar calibration table?
If the Bosch Power Tool cannot read the gauge bar calibration table, reboot the nutrunner.
What to do if Bosch Rexroth Nexo cannot read gauge bar type label?
If the gauge bar type label cannot be read by the Bosch Power Tool, reboot the nutrunner.
What to do if my Bosch Power Tool has initialization of WLAN interface failed?
If the Bosch Power Tool’s initialization of the WLAN interface failed, repeat the WLAN configuration or reboot the nutrunner.
What to do if Bosch Rexroth Nexo Power Tool has WLAN configuration read error?
If the WLAN configuration cannot be read by the internal memory of your Bosch Power Tool, reboot the nutrunner, repeat the WLAN configuration, reset the WLAN settings to default in NEXO-OS, or update the firmware.
General| Brand | Bosch |
|---|---|
| Model | Rexroth Nexo |
| Category | Power Tool |
| Language | English |
Introduces the safety requirements for the Rexroth tightening system and Nexo Wi-Fi nutrunner.
Defines what constitutes improper use of the tightening system and components, outlining forbidden conditions and actions.
Provides general safety guidelines for accident prevention and warns of common dangers like high voltage and movements.
Details safety measures specific to the Nexo cordless Wi-Fi nutrunner, including handling and electrical safety.
Guides through the process of opening and configuring the NEXO-OS operating system for nutrunner setup.
Provides access to various configuration settings for the nutrunner, including time, user accounts, data, and network.
Explains the torque-controlled tightening process, its advantages, function, and applications in assembly.
Details the angle-of-turn-controlled tightening process, its benefits, function, and use with specific bolt types.
Explains error codes, classes, and how errors are displayed and acknowledged on the nutrunner and NEXO-OS.
Guides on using the NEXO-OS system for error detection, acknowledging errors, and checking WLAN status.
Provides a comprehensive list of error codes, their descriptions, possible causes, and suggested solutions for troubleshooting.
To Next Page