Bosch UEZ User Manual

614–30.0212.0270–01 A2 1
OPERATING
INSTRUCTIONS
UEZ – Intrusion Alarm
30.0221.9701 A2
Introduction and Notes on Security 3. . . . . . . . . . . . . . . . . .
Explanation of Display and Operating Elements 4. . . . . . .
Display/operating panel 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Individual/group displays (LED) 5. . . . . . . . . . . . . . . . . . . . . . .
Message processing keys / softkeys with display 6. . . . . . . . .
Fixed function keys 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cursor keys 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Key switch 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sealed switch 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Message Display/Processing
Explanation of display messages 11. . . . . . . . . . . . . . . . . . . . .
Messages with message processing keys 12. . . . . . . . . . . . .
Calling up a list of all message types 13. . . . . . . . . . . . . . . . .
Alarm Verification: see page 48
continued on next page
Message Display/Processing
Resetting the central control unit 14. . . . . . . . . . . . . . . . . . . .
Resetting detector zones/message types 15. . . . . . . . . . . .
Resetting with “General Reset” 16. . . . . . . . . . . . . . . . . . . . .
Arming the System 17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Timer–Controlled Switching
Timer–controlled activation (TCA) 18. . . . . . . . . . . . . . . . . . .
Timer–controlled deactivation 19. . . . . . . . . . . . . . . . . . . . . .
Operation Authorisation
User Code 20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Basic/complete/maintenance operation 21. . . . . . . . . . . . .
Table of Contents

Bosch UEZ Specifications

General

Manufacturer	Bosch
Operating Voltage	12 VDC
Protection Class	IP30
Type	UEZ
Current Consumption	50 mA
Storage Temperature	+70 °C
Relative Humidity	non-condensing
Housing Material	Plastic

Summary

Display and Operating Elements

Control Panel Layout

Details the physical layout of the control panel, including keys, display, and indicators.

Zone LED Status Indicators

Explains the meaning of LED indicators for zone status, alarms, and malfunctions.

Key Functions

Describes the function of softkeys, fixed keys like Reset, Enter, Stop, Code, and F.

Message Display and Processing

Understanding Message Types

Explains different message types, their priority, and how they are displayed on the panel.

Softkey Message Handling

Details using MESSAGES, DETECTOR, MESS.TYPE, ACTIONS softkeys for message management.

System Reset Procedures

Covers resetting the control unit, detector zones, and specific message types.

Arming the System

Area Arming Process

Details the steps to arm an area, including door locking and lamp confirmation.

Operation Authorisation and User Codes

User Code Management

Details how to enter, confirm, and abandon user codes for system access and operation.

Operation Authorisation Levels

Differentiates between maintenance, complete, and basic operation authorisation levels based on user codes.

Operating Main Menu Functions

Zone Status Interrogation

Internal Program Operations

Editing Internal Programs

Adding/Removing Detector Zones

Procedure for modifying internal programs by adding or removing detector zones.

Background Memory and Diagnosis

Changing Operator Code

Operator Code Update Procedure

Steps to change the old user code to a new one, including repetition for verification.

Device Switching Control

System Maintenance and Blocking

Blocking Zones and Detectors

How to block or unblock zones and detectors to exclude them from operation.

Alarm Verification