Bosch UEZ - Operating Main Menu Functions

614–30.0212.0270–01 A2 24
TIMER BACKG.MEM CHAN.CODE
SWITCHOFF MAINTEN. BLOCK
Operating the Functions in the Main Menu
Calling up / quitting the main menu and submenus
Call up
main menu
The softkey can be used
to move from the main menu to the
next submenu.
The authorisation (operator code)
and the alarm counter are displayed.
The individual submenus and their
functions can then be called up using
the appropriate softkey (e.g. “Zones”
submenu).
After the last submenus have been
called up and the softkey
has been pressed, the first subme-
nus of the main menu are displayed
again.
F
Call up
submenus
MAIN MENUE
12 : 23
22.11.96
AUTHORIZATION 2
ALARMCOUNTER 1 112
ALARMCOUNTER 2 219
Enter user code if required (see section on Operating Authorisations)
AREAS INT.-PROG VISU.TEST
Leave sub–
menus and
main menu
stop
Press “Stop” until the submenu and main menu have
been quit.
Abandon code
operation
Code
In code operation, press “code”;
code operation is terminated.
PROGRAM A.VERIF.