614–30.0212.0270–01 A2 26
STATUS AREA 2 OFF
Call up and quit submenu
“AREAS” and appropriate zone:
see previous page.
Operating the Functions in the Main Menu
Switch block type lock lamps on/off, skip detector zones and malfunctions
East hall storage area 3
The softkey is used to switch
the block type lock lamps on
or off.
The status of the block type
lock lamps is shown in the
display above the softkey.
If arming the system is not
possible, max one
”triggered zone” or
”Mains malfunction” or
”Malfunction” NVU or
”Printer malfunction” or
”Malfunction BE 1000
can be removed once from
surveillance.
After disarming, the Service
Department has to be noti-
fied.
Switch block type
lock lamp on/off
READY FOR ARMING
East hall storage area 5
LSN RING/STUBLINE MALFUNCTION
STATUS AREA 3 OFF
Call up and quit submenu
“AREAS” and appropriate
zone: see previous page.
Skip zone
0004 – 05 MALF. Window in staircase
AREA+1 LAMP OFF IGNORE ACTUALISE
The reason why the system is not ready for arming is
shown in the display.
AREA+1 LAMP OFF IGNORE ACTUALISE
To Next Page
Loading...
