Bosch UEZ - Changing Operator Code; Operator Code Update Procedure

614–30.0212.0270–01 A2 37
Operating the Functions in the Main Menu
Changing the operator code
CHANGE CODE
STORE
OLD USER CODE:
NEW USER CODE:
REPETITION:
* * * * * *
* * * * * *
* * * * * *
Enter the old user code and
confirm with “enter”.
Enter the new user code (2 to
6 digits, the first 2 digits must
be identical to the old user
code) and confirm with key
“enter”.
Enter the new user code un-
der “REPETITION” and con-
firm with “enter”.
The inputs are saved with the
softkey “STORE”.
Enter
operator
code
Confirm input
enter
1
ABC
2
DEF
OLD USER CODE:
NEW USER CODE:
REPETITION:
1 2 1 2 1 2
1 2 3 4 * *
Save input
1 2 3 4 * *
Call up and quit submenu
“CHANGE CODE”:
see page 24.
Note: The entered digits are not shown during
the input.
CHANGE CODE
STORE