614–30.0212.0270–01 A2 43
Operating the Functions in the Main Menu
Maintenance
MAINTENANCE
ZONES SIREN KSAFETEST
Notes regarding maintenance:
The operating steps for maintenance are carried out according to the operating concept described in other sections of these operating
instructions. For example, if detector zones, detectors or addresses are to be revised, the individual operating steps can be carried
out as in the section “Switching Detector Zones, Detectors or Addresses on/off”.
Maintenance types:
Zones for
– detector zones on/off
– detectors on/off
– address on/off
– test alarm
Sounders/strobes
– Siren on/off
– test
Key safe KS
– test
Detecter test
– detectors
– line status list
LSN processing module LVM
– change LVM
(in case of redundancy)
DET.REQU. LVM
To Next Page
Loading...
