614–30.0212.0270–01 A2 21
Maintenance:
with hood removed, press “Code” (technician)
Complete operation: code for operation authorisation 2
Basic operation: code for operation authorisation 1
Operation without operator code
x = Operation can be carried out with appropriate code.
x = Operation can be carried out with appropriate code only if programmed.
Operable functions 0 1 2 3
Maintenance:
with hood removed, press “Code” (technician)
Operable functions 0 1 2 3
Interrogation of the zone status (page 25 ff.)
– View activated detector/zone xxxx
– View armed/disarmed status xxxx
– View NSB reasons xxxx
(NSB: not ready for arming)
– Skip ”Detector zones” (x) (x) x
Skip ”Malfunction NVU” (x) (x) x
Skip ”Mains malfunction” (x) (x) x
Skip ”Printer malfunction” (x) (x) x
Skip ”Malfunction BE 1000” (x) (x) x
– Switch block type lock lamps on/off xxx
Internal programs (page 27 ff.)
– Switch internal program on/off (x) x x
– Edit internal program xx
– View internal programs xxxx
Visual test (page 29)
– Switch visual test on/off xx
– View status of visual test xxxx
Timer (page 30 ff.)
– Switch timer channels on/off x
– Change switch times xx
Background memory (page 32 ff.)
– Go to a certain event xxx
(event number, date, latest)
– Select / search events xxx
– Print events (x) x
– Diagnosis x
– View background memory xxx
continued on next page
Operation Authorisation
Basic/complete/maintenance operation
Complete operation: code for operation authorisation 2
Basic operation: code for operation authorisation 1
Operation without operator code
To Next Page
Loading...
