Bosch UEZ - Page 8

614–30.0212.0270–01 A2 8
reset
Reset
Display individual/groups
(LEDs), check display and
buzzer
test
This key triggers the reset processes. After successful reset of all messages, the
system returns to the quiescent condition.
For a detailed explanation, see the section Resetting, pages 14 and 15.
When this key is pressed, all the LED indicators, the display of the operating panel and
the buzzer are verified for correct functioning. The indicator test finishes automatically
after 3 seconds. Then the “Software version” is displayed for 3 seconds.
enter
Confirm input
This key is used to confirm the input of characters.
Call up the
message list
When this key is pressed, the display shows a list of all message types with the asso-
ciat–ed message counters.
For a detailed explanation, see the section Call up a List of all Messages, page 13.
∑
Call up help texts
help?
If this key is pressed, an explanatory text appears in the display. This text provides
further information regarding the menu in which the operator is currently located;
however, the text does not contain any alarm information.
Explanation of Display and Operating Elements
Fixed function keys