44 en | Configuration using a Web browser VideoJet XF E
DOC | V5.51 | 2012.03 Installation and Operating Manual Bosch Sicherheitssysteme GmbH
5.21 Advanced Mode: Encoder Profile
For the video signal encoding, you can select three profiles and a code algorithm for each
video input, and you can change the presets for the profiles.
You can use this to adapt the video data transmission to the operating environment (for
example network structure, bandwidth, data load). You can select the compression settings
for the two data streams individually, for example one setting for transmissions to the Internet
and one for LAN connections.
Pre-programmed profiles are available, each giving priority to different perspectives. Below is
a brief description of the factory default settings for the encoder profiles.
– High resolution 1
High quality for connections with the highest bandwidth, resolution 704 × 576/480 pixels
To Next Page
Loading...
