72 en | Configuration using a Web browser VideoJet XF E
DOC | V5.51 | 2012.03 Installation and Operating Manual Bosch Sicherheitssysteme GmbH
Format
You can select the data format of the alarm message.
– Standard (with JPEG)
E-mail with JPEG image file attachment.
– SMS
E-mail in SMS format to an e-mail-to-SMS gateway (for example, to send an alarm by cell
phone) without an image attachment.
Image size
Select the resolution you wish the JPEG images to have:
– Small
176 × 144/120 pixels (QCIF)
– Medium
352 × 288/240 pixels (CIF)
– Large
704 × 576/480 pixels (4CIF)
Attach JPEG from camera
Click the checkbox to specify that JPEG images are sent from the camera in question. An
enabled video input is indicated by a check mark.
Destination address
Enter the e-mail address for alarm e-mails here. The maximum address length is
49 characters.
Sender name
Enter a unique name for the e-mail sender, for example the location of the unit. This will make
it easier to identify the origin of the e-mail.
Test e-mail
You can test the e-mail function by clicking the Send Now button. An alarm e-mail is
immediately created and sent.
CAUTION!
When a cellphone is used as the receiver, make sure to activate the e-mail or SMS function,
depending on the format, so that these messages can be received.
You can obtain information on operating your cellphone from your cellphone provider.
To Next Page
Loading...
