Bosch VPV 16 - VPV 45;63;80, Single Pump, S.A.E. C Flange, RH Rotation, Installation Drawing

VPV Vane Pump 35
VPV 45/63/80, Single pump, S.A.E. ‘C’ flange, RH rotation
,y
,yz
z
,y
,yz
z
,y
,yz
z
z
,y
{
{|
|
,y
,y
,y
IN
D
OUT
9.74
(247.4)
4.94
(125.4)
3.89
(98.9)
Rotation arrows
cast into body
4.37
(111.0)
8.74
(222.0)
0.76
(19.2)
1.53
(38.9)
Std. SAE 2" pad suction
2.00
dia.
(50.8)
1/2-13 UNC-2B TH'D
4 holes
3.06
(77.8)
0.84
(21.4)
2.04
(51.7)
1.69
(42.9)
8.00
(203.1)
7.48
(190.0)
9.72
(247.0)
4.00
(101.5)
7.30
(185.5)
Optional 2 pressure
solenoid operated (and vent)
compensator
Case drain
port #8 SAE
Optional eye bolt
Centerline
pump control
1.39
(35.2)
3.82
(97.0)
4.24
(107.8 )
3.89
(99.0)
2.78
(70.8)
4.70
(119.4)
ø1.25
(ø31.7)
0.31
square key
(7.98)
9.31
(236.5)
ø5.00
(ø127.0)
1.67
(42.5)
1.67
(42.5)
SAE "C" mounting flange
7.30
(185.5)
7.13
(181.0)
Compensator adjusting knob
(CW rotation increases
pressure setting)
SCALE: 2X
0.69
(17.6)
2.66
(67.7)
1.91
(48.6)
Optional 2 pressure
solenoid operated vent
compensator
Optional 2 pressure
solenoid operated
compensator
Manual override
pushpin
1/2" conduit
connector
DIN 43650 connector
w/ 1/2" NPT compression
fitting and sentinal light
(Optional)
Optional 2 stage with
load compensator
Load sense port
#4 S.A.E.
2 stage compensator
Remote control port
7/16 – 20 UNF, 0.45 deep
Inches (millimeters)