COMPLETE ASSEMBLY FOR
SINGLE STAGE COMPENSATOR
Consult factory.
SEAL KIT FOR
SINGLE STAGE COMPENSATOR
Consult factory.
REF DESCRIPTION QTY
1 O-ring 19mm i.d. X 2.5mm c.s. 1
2 O-ring ASA-916 1
3 O-ring 15.3mm i.d. X 2.4mm c.s. 1
4 O-ring ASA-111 3
5 O-ring ASA-143 1
Viton seal kits consist of:
4
5
6
12
9
11
10
7
8
3
1
2
Torque to 442 - 531 lb/in
(Torque to 50 - 60 Nm)
Torque to 150 - 186 lb/in
(Torque to 17 - 21 Nm)
Torque to 708 - 885 lb/in
(Torque to 80 - 100 Nm)
Torque to 44 - 62 lb/in
(Torque to 5 - 7 Nm)
Pressure adjustment
lock-nut
REF DESCRIPTION QTY
1 O-ring ASA-113 1
2 Back up ring 1
3 O-ring 1
4 O-ring ASA-111 3
5 O-ring ASA-143 1
6 O-ring 15.3, i.d. x 2.4mm c.s. 1
7 O-ring ASA-111 1
8 Back up ring 1
9 O-ring ASA-011 2
10 Poppet 1
11 Poppet seat w/ O-ring 1
12 Plug w/ O-ring 1
COMPLETE ASSSEMBLY FOR
TWO STAGE COMPENSATOR
SAE 9 511 230 610
METRIC 9 511 230 611
COMPLETE ASSEMBLY FOR
LOAD SENSE
SAE 9 511 230 612
METRIC 9 511 230 613
REPAIR KIT FOR
TWO-STAGE COMPENSATOR
SAE 9 511 230 660
METRIC 9 511 230 661
Repair kit consists of:
TWO-STAGE COMPENSATOR
Note:
Qty of 3, M6 S.H.C.S. not shown.
Mounts 2nd stage to 1st stage compensator
Torque to 133 - 177 lb/in
(Torque to 15 - 20 Nm,)
ATTENTION: These compensators are
rated for 210 bar (3000 psi) operation.
Install only on pumps rated at 210 bar
(3000 psi).
BOLT KIT FOR MOUNTING TWO STAGE
& SOLENOID COMPENSATORS TO
VPV 45/164 (M10 X 1.5 X 40)
9 539 232 014
To Next Page
Loading...
