Bose 3-2-1 SERIES II User Manual

SYSTEM SETUP
Connecting the power cord
CAUTION: For dual voltage models only, be sure to set the dual voltage switch on the back of
the Acoustimass c_module to the appropriate voltage for your area (115V or 230V) before con-
necting to power. If you are not sure about the proper voltage for your area, consult your local
electrical authorities.
1, Insert the small connector end of the power cord into the AC INPUT connector on the
Acoustimass module (Figure 20).
2, Insert the large end of the cord into an AC power (mains) outlet.
eb Note: On 220-240V models only, turn the Acoustimass module POWER switch to on (I).
Figure 20
Connectingto power
@
AC input
jack
iO00000000000000
AC power
switch
ohNote: Provided
only on 220-240V// ,, "_
rated systems. _
115/230V
selection
switch
_ Note: Provided
only on 115/230V
dual voltage rated
systems.
Note: Bose recommends using a safety agency-approved surge protector on all electronic
equipment. Voltage variations and spikes can damage electronic components in any system.
A quality suppressor can eliminate the vast majority of failures attributed to surges and may be
purchased at electronics stores.
24

Bose 3-2-1 SERIES II Specifications

General

Number of Speakers	2
Subwoofer	Acoustimass Module
AM/FM Tuner	Yes
Remote Control	Yes
Audio Channels	2.1
System Type	2.1 Home Theater System
Media Playback	DVD, CD
Outputs	Composite Video