ENGLISH - 17
SETTING UP THE SOUNDBAR
Connecting to power
1. Plug one end of the power cord into the connector on the back of the
soundbar.
2. Plug the other end of the power cord into a live AC (mains) outlet.
Installing the remote control’s batteries
1. Slide open the battery compartment cover on the back of the remote control.
2. Insert the two provided AAA (IEC-LR3) 1.5V batteries. Match the + and – symbols on
the batteries with the + and – markings inside the compartment.
3. Slide the battery compartment cover back into place.
To Next Page
Loading...
