44 - ENGLISH
ADVANCED FEATURES
Resetting the soundbar
Factory reset clears all source, volume, network and ADAPTiQ® audio calibration
settings from the soundbar and returns it to original factory settings.
1. On the remote control, press the SoundTouch® button .
2. Press and hold the TeleText button for 10 seconds until the Wi-Fi indicator ,
TV indicator
, SoundTouch® indicator and Bluetooth indicator on the
soundbar blink white.
The soundbar reboots and on the soundbar glows amber (setup mode) when the
reset is complete.
3. To restore the soundbar’s network and audio settings:
• Launch the SoundTouch® app on your smartphone or tablet and add the system to
your network (see page 27).
• Run ADAPTiQ audio calibration (see page 22).
To Next Page
Loading...
