ENGLISH - 23
FINISHING SOUNDBAR SETUP
4. Press and hold until the TV indicator and the Bluetooth indicator on the
soundbar glow green.
1
2
The ADAPTiQ process begins.
Note: If you don’t hear your language, press and on the navigation pad
(see page 24) to cycle through languages. To reset the language, press
and hold
for 10 seconds.
5. Follow the voice prompts until the ADAPTiQ process is complete.
If you hear an error message and are unable to complete ADAPTiQ audio calibration,
see “ADAPTiQ® audio calibration error messages” on page 53.
6. Unplug the ADAPTiQ headset from the soundbar and store it in a safe place.
If you later pair the optional bass module or surround speakers, move or mount the
soundbar or move any furniture, run ADAPTiQ audio calibration again to ensure
optimal sound quality.
To Next Page
Loading...
