9
Panel Descriptions
15
. MODE Knob
Use this knob to switch between the RC-2’s operating modes.
MODE Knob Position
Description
The pedal switch can be used to set the tempo as well as control recording, playback, and
overdubbing (p. 18).
The pedal switch is used to control recording, playback, and overdubbing (p. 13).
(This is the RC-2’s normal operating mode.)
AUTO
After the pedal switch is used to put the RC-2 in recording standby, recording begins automat-
ically when audio is received at the INPUT or AUX IN jack (p. 16).
4/4
Allows you to use the TAP TEMPO/SELECT/ENTER button to set the time signature for the
guide (p. 36).
Allows you to use the TAP TEMPO/SELECT/ENTER button to select the guide sound pattern
(p. 36).
Allows you to use the TAP TEMPO/SELECT/ENTER button to toggle between loop and
one-shot playback for the selected phrase track (p. 27).
DELETE
Allows you to use the TAP TEMPO/SELECT/ENTER button to save a phrase to the selected
phrase track the selected phrase track
(p. 33).
WRITE
Allows you to use the TAP TEMPO/SELECT/ENTER button to save a phrase to the selected
phrase track (p. 32).
RC-2_e.book 9 ページ ２００６年１０月２７日 金曜日 午前１０時３１分
To Next Page
Loading...
Need help?
General
