8
Panel Descriptions
13
. TAP TEMPO/SELECT/ENTER Button
Use this when setting tempos, changing parameter values, and deleting and writing data.
The function changes according to the position of the MODE knob.
14
. REC/PLAY/DUB Indicator
This lights or flashes during recording, playback, and overdubbing.
MODE Knob Position
Description
, , AUTO
Set the tempo by repeatedly pressing the button at the desired speed (“Setting the tempo”; p. 35).
The indicator flashes at the same rate as the tempo.
4/4
Switches the time signature each time the button is pressed (p. 36).
(The time signature must be set before recording.)
Switches the guide pattern each time the button is pressed (p. 36).
Switches between loop and one-shot playback for the selected phrase track each time the button
is pressed (p. 27).
(This function is available only when data is stored in the selected phrase track.)
DELETE
Use the button to delete the selected phrase track (p. 33).
(When the MODE knob is set to DELETE, the button’s indicator flashes or lights in yellow.)
WRITE
Use the button to save a recorded phrase to the selected phrase track (p. 32).
(When the MODE knob is set to WRITE, the button’s indicator flashes or lights in red.)
Lights Flashes Rapidly
Red
During recording During recording standby
Green
During playback When phrases are switched with Phrase Shift (p. 29)
Yellow
During overdubbing During UNDO and REDO (p. 15)
RC-2_e.book 8 ページ ２００６年１０月２７日 金曜日 午前１０時３１分
To Next Page
Loading...
Need help?
General
