12. Insert the Bench into the Seat Slider and then Pivot onto the Seat Rail
Be sure the end of the Bench sets rmly into the hinge on the Seat Slider, and then pivot it downward onto the Seat Rail. If the
Bench is not fully engaged with the Seat Slider and Seat Rail, the Bench will be unstable and could disengage and potentially
cause injury or harm to the user.
8
13. Final Inspection
Inspect your machine to ensure that all fasteners are tight and components are properly assembled. Unwrap the cables without crimping them.
Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Owner’s
Manual.
Assembly Manual
17
To Next Page
Loading...
