Bowflex PR3000 - Leg Extension Cable Routing; Final Inspection

45
46
46
Assembly
Step 16: Leg Press Extension Cable Routing
Parts
•(3)SnapHooks(#46)
•(2)LegPressExtensionCables(#45)
16-1 Attach one set of snap hooks onto the left and right squat cables.
16-2 Attach the Leg Press Extension Cables.
16-3 Attach a snap hook to the Leg Extension Assembly and connect the Leg Press Extension Cables.
Final Inspection
Inspect your machine to ensure that all fasteners are tight and components are properly assembled.
Failure to visually check and test assembly before use can cause damage to the equipment. It can also cause
 seriousinjurytousersandbystanders.
Assembly Manual
21