Bowflex PR3000 - Power Rod Resistance System; Equipment Maintenance and Care

Assembly
Step 3: Attach the Lower Lat Assembly to the Base Assembly
Parts
• CompetedAssembly(fromstep1)
• LowerLatTowerAssembly(fromstep2)
Hardware
• (2)3/8”x3/4”HexHeadBolts(#1)
• (2)3/8”Washers(#5)
Tools
• AdjustableWrench(notincluded)
3-1 Put the Lower Lat Tower Assembly onto the Completed Assembly.
3-2 Install and tighten the hardware.
5
1
Assembly Manual
8