Bowflex PR3000 - Attach the Rod Pack

Assembly
Step 2: Attach the Rod Pack
Parts
• RodPack(#29)
• LowerLatTower(#30)
• RodPackStrap(#41)
Hardware
• (3)#10x1”PhillipsHeadScrews(#6)
• (3)1/4”Washers(#3)
Tools
• PhillipsHeadScrewDriver(notincluded)
2-1 Slide the Rod Pack into the Lower Lat Tower.
2-2 Install and tighten the hardware.
30
29
41
3
6
Assembly Manual
7