Bowflex ULTIMATE 2 - Decline Bench Press; Incline Bench Press

22
Assembling Your Bowflex Ultimate
®
2
STEP 6
Parts:
 •BaseAssembly
 •RodBox(Box4)
Tools:
 •HexKey(7/32”)
6-1 LeaveBaseinfoldedpositionandtiltforwardto
gainaccesstobottomofRearBase.
6-2 PlacetheRodBoxthroughRearBaseandalign
with holes in base frame.
6-3 Installthe43/4”screwrsttoholdtheRodBoxin
positiontheninstallthefour3/4”screws.
6-4 Installthetwo#8x3/4”screwstosecuretherear
basecovers.Completelytightenallthehardware.
4 Pan Head Allen Bolt (3/8” X 3/4”) 5 Washers (3/8”)
Hardware (1:1):
Pan Head Allen
Bolt 3/4”
Washer
Rod Box
Pan Head Allen Bolt
4 3/4”
1 Pan Head Allen Bolt (3/8” X 4 3/4”)
2 Self Tapping Screws (#8 X 3/4”)
2 Washers (#8)
#8 x 3/4” Self
Tapping Screw
STEP 7 (Requires Two People)
Parts:
 •BaseAssembly
 •RodPack(Box1)
Tools:
 •PhillipsHeadScrewdriver
7-1 LeaveBaseinfoldedpositionfromstep6.
7-2 HaveonepersonaligntheRodPackwiththeslot
intheRodBoxwiththe50Lb.rodsfacingdown.
7-3 HavesecondpersonInstallandcompletely
tightenhardware.
3 Self Tapping Screws (#10 X 1”)
Hardware (1:1):
Rod Pack
Self Tapping
Screw
Washer
50 Lb. Rods
facing down
Align with slot
in Rod Box
3 Washers (1/4”)