33
System Settings
7.1 Set the language
Press Menu → Utility → System → User Settings → Language to switch the language.
The language can be set to English or Chinese.
7.2 Setting the date/time
Press Menu → Utility → System → Date Time to set the date and time.
Note: Setting the second is not supported using the front panel. The second can be set using the
command SYST: TIME <hour>, <minute>, <second> can be used.
7.3 Setting the buzzer and brightness
Press Menu → Utility → System → User Settings to enter the setup menu to set the sound and
brightness.
Beeper and Key Click are independent and do not affect each other.
In order to prevent the screen from being completely black, the minimum brightness is 20.
Tip: You can quickly adjust the brightness by using the then pressing up or down keys.
7.4 Setting the format of the digital display
Press Menu → Utility → System → User Settings → Number to set the format of the digit display.
In order to support the digital format commonly used in the U.S. and Europe, you can choose the
decimal point and separator type.
The decimal point can be set to '.' (Period) or ',' (Comma).
The separator can be a space, ',' or '.' (On), or no separator (None).
To Next Page
Loading...