16
5.4 - Press the or button (fig. 18) until the
desired value is reached.
5.5 - Press button to end the procedure for set-
ting the time (fig. 19).
The colon between the hours and minutes flashes
confirming that the the operation is complete.
If no button is pressed for 10 seconds, the unit
automatically exits this procedure, saving the last
set data.
6 - HEATING OR COOLING PRO-
GRAMME
Press button ( ) (fig. 20) to toggle between cool-
ing ( ) or heating ( ), the corresponding operating
Fig. 18
To Next Page
Loading...
