thermostat returns to AUTOMATIC operating
mode.
Note. To return to AUTOMATIC operating mode
before the programmed period expires press the
button.
13 - DISPLAYING THE
PROGRAMMED TEMPERATURES
13.1 - Press button (fig. 42).
For 10 seconds the display will reveal the set tem-
perature associated with the indicated hour.
12.5 - Press the button twice (fig. 40).
In place of the current time d01 will appear.
For 5 seconds the room temperature reading dis-
appears to be replaced by or the frost pro-
tection temperature.
12.6 - Press the or buttons until the desired
number of hours or days from 1 to 99 is reached
(fig. 41).
The days count includes those when programming
is performed. The remaining part of the day when
the operation is performed is therefore counted as
one day. Once the calculation has completed the
To Next Page
Loading...
