Control Panel
35
‘Printing label’ state
The printer is currently processing an active print job. Data can be transmitted
for a new print job. The new print job will start when the previous one has
finished.
The display shows the message Printing label and the number of the
printed label in the print job.
‘Pause’ state
The printing process has been interrupted by the operator.
The display shows the text Pause and the symbol .
‘Correctable error’ state
An error has occurred that can be rectified by the operator without interrupting
the print job. The print job can be continued after the error has been rectified.
The display shows the symbol , the type of error and the number of labels
still to be printed.
‘Irrecoverable error’ state
An error has occurred that cannot be rectified without interrupting the print
job.
The display shows the symbol , the type of error and the number of labels
still to be printed.
‘System fault’ state
If a fault occurs during the system test, the symbol and type of error are
displayed.
■ Switch the printer off and then on again at the power switch.
or
■ Press the cancel key.
Call Service if the error occurs persistently.
To Next Page
Loading...
Need help?
General
