Control Panel
55
Firmware Update from Memory Card
1. Format CompactFlash memory card in printer.
The directories “fonts,” “images,” “labels” and “misc” are created on the
memory card.
2. Copy the firmware file to the “misc” directory in a CompactFlash drive.
3. Insert the prepared memory card into the printer.
4. Press the menu button.
5. Select Service > Firmw. fr. card menu.
6. Press the
key.
7. If the function Firmw. fr. card is protected via a PIN, use the S, T,
X and W keys to enter the code number and confirm with the
key.
The names of the firmware files found on the memory card are shown in the
display.
8. If several firmware files are found on the memory card, select the desired
file with the S and T keys.
9. Press the
key.
The selected firmware file is copied. A progress indicator is displayed while
the firmware is being copied. OK appears in the display once copying is
successfully completed.
10. Press the
key.
To Next Page
Loading...
Need help?
General
