Control Panel
49
>Backfeed
delay
Delay time between removing the label from the
peel position and the backfeed of the label.
250 ms
> Limit
peel-off
spd.
Limitation of the print speed in the Peel-off mode to
100 mm/s.
On
Brightn.
LCD
Brightness of the LCD display from 1 to 10. 10
Contrast
LCD
Contrast of the LCD display from 4 to 8. 6
Time
Powersave
Time between the last operation and the activation
of Powersave mode.
5 min.
Debug mode Operating mode which supports the firmware
programmer when localizing errors.
Off
Parameter Meaning Default
To Next Page
Loading...
Need help?
General
