2
Aesculap
®
High frequency surgical device GN060
Aesculap
®
High frequency surgical device GN060
Legend
1 LED display: Device prepared for turning on
2 LED display: Device on (device ready for operation)
3 "Device on/off" button
4 Button for switching the operating mode "Micro"-"Macro"
5 LED display: "Micro"
6 LED display: "Macro"
7 Button for reducing the dose
8 Display (dose display/error code)
9 LED display: HF output active
10 Button for increasing the dose
11 LED display: Prepare memory for saving the displayed dose adjustment
12 Storage buttons 1-4
13 LED displays: selected memory
14 Sockets for bipolar cable with two connectors (USA cable)
15 Socket for bipolar cable
16 Socket for foot switch
17 Symbol for automatic switching on of the HF output
18 Symbol for foot switch operation
19 Button for switching from automatic to foot switch operation
20 Button: "Preparing for storage"
21 Label
22 Potential equalization connector
23 Power input jack with double fuse holder and mains voltage selection
bit
Symbols of the operating elements on the
front panel
"Device on/off" button
"Micro"-"Macro" switching button
Automatic/foot switch operation switch button
Increase dose
Reduce dose
Button for storing a device setting
Storage button
To Next Page
Loading...
