3
Symbols on product and packaging Contents
1. Safe handling 4
1.1 Safe for use in conformance with IEC regulations 4
2. Product description 6
2.1 Scope of supply 6
2.2 Components required for operation 6
2.3 Intended use 6
2.4 Operating principle 6
3. Preparation and setup 7
3.1 First use 7
3.2 Stacking of units 7
3.3 Moving stacks of units 8
3.4 Dismantling stacks of devices 8
3.5 Presetting the correct voltage 8
4. Working with the HF surgical device GN060 9
4.1 System set-up 9
4.2 Function checks 9
4.3 Safe operation 10
4.4 Protection against faulty operation 11
4.5 Protection against incorrect dosage 12
5. Validated reprocessing procedure 12
5.1 General safety instructions 12
5.2 General information 13
5.3 Preparation before cleaning 13
5.4 Cleaning/disinfection 13
5.5 Wipe disinfection for electrical devices without sterilization 14
5.6 Inspection, maintenance and checks 14
5.7 Storage and transport 14
6. Maintenance 14
6.1 Safety inspection 14
7. Troubleshooting list 16
7.1 Fuse replacement 17
8. Technical Service 17
9. Accessories/Spare parts 18
10. Technical data 18
10.1 Ambient conditions 19
11. Disposal 19
12. Distributor in the US/Contact in Canada for product
information and complaints 19
Follow instructions for use (small white man on
a blue background)
Icon: Caution
Out put isolated from ground
Defibrillation-protected type CF applied part
Foot switch
Potential equalization
Fuse
Alternating current
Marking of electric and electronic devices
according to directive 2002/96/EC (WEEE). see
Disposal
Non-ionizing radiation
Manufacturer’s batch designation
Manufacturer’s serial number
Manufacturer’s article number
Date of manufacture
LOT
To Next Page
Loading...
