Bray 71 Seires - Safety; Hazard Free Use; Qualified Personnel

3
Series 71 – Modulating Controller - Electric Actuator
Installation, Operation and Maintenance Manual
2.0 SAFETY
 Hazard Free Use
This device left the factory in proper condition to be safely installed and
operated in a hazard-free manner. The notes and warnings in this document
must be observed by the user to ensure hazard-free operation of this device.
All necessary precautions need to be taken to prevent damage due to rough
handling, impact, or improper storage. Do not use abrasive compounds to
clean the device, or scrape its surfaces with any objects.
Configuration and setup procedures for this device are described in this
manual. Proper configuration and setup are required for the safe operation of
this device.
The control system in which this device is installed must have proper
safeguards to prevent injury to personnel, or damage to equipment, should a
failure of system components occur.
WARNING
The device generates large mechanical force during normal operation
 Qualified Personnel
WARNING
The actuator must only be installed commissioned operated and repaired by qualified
personnel
Installation commissioning operation and maintenance must be performed under
strict observation of all applicable codes standards and safety regulations
As per this document, a qualified person is one who is trained in:
1. The operation and maintenance of electric equipment and systems in
accordance with established safety practices.
2. Procedures to energize, de-energize, ground, tag and lock electrical
circuits and equipment in accordance with established safety practices.
3. The proper use and care of personal protective equipment (PPE) in
accordance with established safety practices.
4. First aid.