24 Using the iSleep 20+
iSleep 20+ users manual
Doc. 004270 En-Eu T-3b
Adding Water to the Humidifier
At the main menu, choose “Humid-
ity” to navigate to the humidifier sec-
tion. The humidity setting range from
Off, 1 to 9, where 9 generates the
maximum humidity.
Always set the humidity control to the
setting recommended by your doctor.
• Never add or pour out water from the humidifier when attached to the
iSleep 20+ main unit.
• Prevent water from entering the iSleep 20+.
• Always turn off the iSleep 20+ and disconnect the mains supply before
removing the humidifier.
• Do not use the humidifier if the internal pipe in the water container is miss-
ing.
• Do not overfill the humidifier.
• If water on outside of the humidifier after filling, dry the humidifier using a
lint-free cloth before reconnecting it to the iSleep 20+.
To Next Page
Loading...
