Breas iSleep 20+ - Preparing the iSleep 20+ for Use; Installing the iSleep 20+

28 Preparing the iSleep 20+ for Use
iSleep 20+ users manual
Doc. 004270 En-Eu T-3b
6 Preparing the iSleep 20+ for Use
6.1 Installing the iSleep 20+
When using the iSleep 20+ for the first time, follow the instructions below:
Read the chapter “Safety Information” on page 7 before setting up and
using the iSleep 20+.
1 Check that all main compo-
nents and ordered accessories
have been delivered (refer to
the packing note or the invoice,
if available).
2 Ensure that the equipment
is in good condition.
3 Check that the mandatory
grey patient air filter is installed.