8 Safety Information
iSleep 20+ users manual
Doc. 004270 En-Eu T-3b
2.2 Electrical Safety
• Do not operate the iSleep 20+ if it has a damaged power cord, power sup-
ply or casing.
• The iSleep 20+ may not work properly if any part has been dropped, dam-
aged or submerged in water.
• To avoid electrical shock, disconnect the electrical supply to the iSleep 20+
before cleaning. Do not immerse the iSleep 20+ into any fluids.
• When handling the HA 01 humidifier, disconnect the iSleep 20+ from any
power source.
• If an external battery is used it must be disconnected when the iSleep 20+
is switched off. Otherwise the battery will discharge.
• The performance of the iSleep 20+ may deteriorate at:
– AC supply voltage below -15% and above +10% of declared nominal
value.
– DC supply voltage below -15% and above +25% of declared nominal
value.
To Next Page
Loading...
