36 Cleaning the iSleep 20+ and Replacing the Filters
iSleep 20+ users manual
Doc. 004270 En-Eu T-3b
9 Cleaning the iSleep 20+ and Replacing the Fil-
ters
The patient-connected parts and the filter must be cleaned and replaced regu-
larly to ensure correct function of the iSleep 20+. All replaced parts must be dis-
posed of in accordance with local environmental regulations regarding the
disposal of used equipment and waste.
9.1 Cleaning the iSleep 20+
Main Unit
To avoid electrical shock, disconnect the mains supply to the iSleep 20+
before cleaning. Do not immerse the iSleep 20+ into any fluids.
• Always be careful when cleaning to ensure that you do not damage any
equipment.
• Fluid must not be allowed to enter into the iSleep 20+.
1
Switch off the iSleep 20+ and dis-
connect the mains supply.
2
Remove the patient circuit.
To Next Page
Loading...
