EasyManua.ls Logo

Breas iSleep 20+ - Page 37

Breas iSleep 20+
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
37Cleaning the iSleep 20+ and Replacing the Filters
iSleep 20+ users manual
Doc. 004270 En-Eu T-3b
HA 01 Humidifier
The HA 01 humidifier must be cleaned regularly.
The HA 01 humidifier shall be replaced in intervals according to the care pro-
vider’s instructions. Also check the HA 01 humidifier for damage regularly. In
case of damage, replace the HA 01 humidifier.
Patient Circuit
3
Detach the rear lid or the humidi-
fier.
4
Disconnect the cable.
5
Clean the outside of the
iSleep 20+ using a lint-free cloth and
a mild detergent solution.
6
Reconnect the cable and the
patient circuit. Make sure all
parts are dry before the
iSleep 20+ is put into opera-
tion.
Information on cleaning the HA 01 humidifier can be found in the Breas
HA 01 humidifier User Manual.
The patient circuit should be cleaned in accordance with the care provider's instruc-
tions.

Other manuals for Breas iSleep 20+

Related product manuals