31Setting up the iSleep 20+
iSleep 20+ users manual
Doc. 004270 En-Eu T-3b
7 Setting up the iSleep 20+
7.1 Settings Applicable for iSleep 20+
7.2 Setting the Parameters
The Ramp function
The configuration of the iSleep 20+ therapy settings must always be pre-
scribed by a licensed physician and carried out by an authorized health
care professional.
For more information about the Breas iSleep 20+’s settings, please contact your
care provider.
SETTING RANGE RESOLUTION
Ramp time 5 to 60 min 5 min
Humidifier Off, 1 to 9 1
The operation modes and setting parameters are described in detail in the chapter
“Functions and Parameters of the iSleep 20+” on page 19.
For more information about how to use the menu, please read the chapter “Using
the Menu” on page 22.
Study the overview picture in “Using the Menu” on page 22 if a page or section can
not be found.
Setting range: 5 to 60 min.
Resolution: 5 min.
Navigate to the “Ramp” section. The
ramp function can only be activated
during operation.
To Next Page
Loading...
