EasyManuals Logo

Bresser 4CAST CV WIFI User Manual

Bresser 4CAST CV WIFI
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
RISK OF FIRE/EXPLOSION!


NOTE!
Do not disassemble the device. In the event of a defect, please contact your dealer. The dealer will contact the
Service Centre and can send the device in to be repaired, if necessary.
Do not immerse the unit in water.
Do not subject the unit to excessive force, shock, dust, extreme temperature or high humidity, which may
result in malfunction, shorter electronic life span, damaged batteries and distorted parts.
Use only the recommended batteries. Always replace weak or empty batteries with a new, complete set of
󰀨󰀨
batteries from the unit if it has not been used for a long time.
The manufacturer is not liable for damage related to improperly installed batteries!
1. INTRODUCTION
Thank you for selecting the 4CAST CV WI-FI weather station. This system gathers many
advance features for weather observer, such as ProWeatherLive (PWL) cloud service which
provide online weather forecast and condition of your area onto your console while at the same
time receiving your personal weather data upload to be viewed on PWL website or PWL App
anytime. The 7-in-1 professional wireless sensor-array integrates temperature, humidity, wind,
rain, UV and light sensors together, to continually monitoring your local weather conditions at all
time and transmit these data to your console through wireless radio frequency technology. This
system also support up to 7 thermo-hygro sensor(s) and other advance optional sensor(s) such
as lightning sensor, water leak sensors, and air quality sensors which include PM2.5/10, CO,
HCHO/VOC and CO sensors, so you may monitor all your environment condition in one system,
one app.
1.1 QUICK START GUIDE
The following Quick Start Guide provides the necessary steps to install and operate the weather
station, and upload to the Internet, along with references to the pertinent sections.
Step Description Section
1 Power up the 7-in-1 wireless sensor array 3.1.3
2 Power up the display console and pair with sensor array 3.4
3 Manually set date and time (This part is unnecessary if the weather
station is connected to internet and time synchronize function is on)
4.5.1
4 Reset the rain to zero 4.3.14.3
5 Create account and register weather station at PWL 5
6 Connect weather station to WI-FI 6

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Bresser 4CAST CV WIFI and is the answer not in the manual?

Bresser 4CAST CV WIFI Specifications

General IconGeneral
BrandBresser
Model4CAST CV WIFI
CategoryWeather Station
LanguageEnglish

Related product manuals