www.bresser.de
③ Choose one extruder and move it to the first nut by hand. Place a sheet of paper
under the extruder and tighten the nut to reduce the distance between extruder
and platform. Gently move the paper and feel the friction. If the paper has only
slight friction, the distance between the extruder and the platform is set correctly.
After the adjustment of the first plate is completed, repeat the procedure for the
second and third nut.
Note: The short distance between extruder and platform makes it difficult to
remove printed objects. Greater distances lead to bonding errors or wrapping.
To Next Page
Loading...
