Brigade Backsense BS-8100 - Reading Configuration from the Brigade Backsense System; Saving Configuration to a File; Loading Configuration from a File

24
4.3.7 Reading Configuration from the Brigade Backsense
®
System
Make sure the Configuration Tool is in connected state. In menu area, click “System” then
“Read Configuration”. This will read the configuration from the display. This is useful if a
configuration needs to be modified, copied from one system to another or stored in a file for
any future use. Once configuration is written a confirmation window will appear, click “OK”.
See the image below.
4.3.8 Saving Configuration to a File
All settings in the Configuration Tool can be saved to a file at any point of time with or without
being connected to the system. The saved file is in a format that can only be read from the
Configuration Tool.
Click in menu area “System” then “Save Configuration”. This opens a window for the selection
of the save location and file name.
4.3.9 Loading Configuration from a File
All settings in the Configuration Tool can be loaded from a previously saved file. The loading
function is supported whether or not the Brigade Backsense
®
System is connected. Any
current settings in the Configuration Tool will be lost.