Britax EMBLEM - Page 36

34
BRITAX Child Safety, Inc.
d. Pull the end of the
belly pad and buckle
retainer out of the
buckle slot in the
cover to remove.
e. Turn the buckle
retainer sideways
and slide the buckle
out of the belly pad.
5. Detach the hook and loop
fasteners on the head
restraint/head pad cover
from around the harness.
6. Remove the head
restraint/head pad cover.
a. Raise the harness to
the highest position.
b. Detach the elastic
straps from the tabs
behind harness
height adjuster.
c� EMBLEM ONLY:
Detach the hook and
loop fastener from
behind the harness
height adjuster and
lift cover o.
ALLEGIANCE
ONLY: Lift cover
over harness height
adjuster.
7. Adjust the harness to
the lowest position and
detach the plastic hooks
from the bottom edge of
the child seat.
8. Remove the cover from
the shell.
4d
4e