Britax EMBLEM - Page 37

35
EMBLEM/ALLEGIANCE Canadian User Guide
Replacing the Cover
3a
3c
3d
3b
1. Fit the child seat cover
around the child seat
shell.
2. Replace the belly pad and
buckle:
a. Turn the buckle
retainer sideways
and route it through
the belly pad.
b. Route the belly pad
and buckle retainer
through the buckle
slot in the cover.
– Ensure that the
buckle is through
the desired cover
slot for the buckle
position.
c. Slide the end of the
belly pad over the
comfort foam on the
child seat.
d. Turn the buckle
retainer sideways
and route it through
the front buckle
slot and then into
the desired buckle
position in the child
seat.
3. Attach the plastic hooks
to the bottom edge of the
child seat.