Torque force value:
Rear brake disc mounting bolts 15-25N·m
Rear hydraulic brake lower pump mounting bolts 25-35N·m
Rear hydraulic brake oil pump mounting bolts 7-9N·m
Rear axle 75-85N·m
Do not contaminate brake shoes and brake discs with grease.
If a braking shoe or a brake disc is polluted by grease, clean it with a brake cleaner.
* Attentions
A contaminated brake shoe will
decrease braking performance.
II Motorcycle Exteriors
Disassemble the motorcycle body in the following sequence.
Rear-view mirror → Headlamp → Instrument bracket Instrument
Front mud fender → Seat cushion →Left and right cover → Fuel tank →
Left and right pedal →Tail lamp → Rear mud fender →License plate
bracket
* Attentions
Do not damage the cover of the motorcycle while removing or installing.
Do not break the hooks of the cover while removing or installing.
Place the panel and the cover board right to the respective slots.
Install correctly the hooks of each part while combining.
Do not damage the accessories while installing covers.
KS MOTORCYCLES - http://ksmotorcycles.com
To Next Page
Loading...
