10.2 Fault Diagnosis
Low compression pressure
Bad valve stroke adjustment
Valve burned or bent
Bad valve base air tightness
Air leakage from cylinder head gasket
Poor installation of spark plug
Abnormal noise in cylinder head
Bad valve stroke adjustment
Valve spring damaged
Too high compression pressure
Too much carbon deposits in combustion chamber
10.3 Cylinder Head
Disassembly
Loosen the mounting bolts and remove the cylinder head
cover (swing arm and its shaft).
Remove the tightener, loosen chain and take down the
camshaft.
KS MOTORCYCLES - http://ksmotorcycles.com
To Next Page
Loading...
