EasyManua.ls Logo

Brixton BX125 - Headlamp Bulb Replacement; Replacement of the Front; Turn Signal Light; Replacement of Taillight;License Plate Light;Rear Turn Signal Light

Brixton BX125
148 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
76
8.3 Headlamp bulb replacement
8.3.1 Removal
Remove the screws to facilitate the removal of the headlight.
Remove the connectors.
Remove the headlight locking clip to take off the bulb.
8.3.2 Installation
Install the light back in the reverse order of removal.
8.4 Replacement of the front
turn signal light
8.4.1 Removal
Loosen the light fixing screw.
Take off the light.
8.4.2 Installation
Install the light back in the reverse order of removal.
8.5 Replacement of taillight/license plate light/rear turn
signal light
8.5.1 Removal
Remove the screws and take off the lampshade.
Remove the bulb from the socket.
8.5.2 Installation
Install the bulb in the reverse order of removal.
8.5.3 Replacement of rear turn signal light
8.5.3.1 Removal
KS MOTORCYCLES - http://ksmotorcycles.com

Table of Contents

Related product manuals