Brixton BX125 - Service Data; Starting System; Trigger

70
ignition coil cap and negative terminal.
Standard value: 4.5-5.5KΩ(±)10%(20
℃)
6.5 Trigger
* Attentions
Trigger inspection can be performed on the
engine.
Inspection
Remove the trigger lead connectors, connect the resistance grade end of a multimeter with the
blue-white line, the other end with the green-white line, measure the resistance.
Connection mode: see the right figure.
Resistance: 125±20Ω.
VII. Starting System
Service Data-----------7.1
Fault Diagnosis--------7.2
Starter Motor-----------7.3
Starter Relay------------7.4
7.1 Service Data
Precautions on operation
Starter motor removal can be performed on the engine.
Removal refers to removal instructions.
Basic data
Item
Standard
Service Limit
Length of starter motor
electric carbon brush
12.5mm
8.5mm
Starter idler shaft bushing
8.3mm
KS MOTORCYCLES - http://ksmotorcycles.com