G720-Install-IG101 Installation Guide
Brocade
®
G720 Switch Hardware Installation Guide
–
48 LEDs (green/amber) for the first 48 SFP+ ports and 8 LEDs (green/amber/white) for the last 8 SFP+ ports.
–
One green LED to indicate valid system power.
–
One bicolor (green/amber) LED to indicate the system status.
–
Two Ethernet LEDs: one green LED to indicate link speed of 1000/100/10Mb/s and one green LED to indicate
activity.
•
SEEPROM for switch identification.
•
Encryptable SEEPROM.
•
Secure encryptable SEEPROM.
NOTE
The License ID is protected by the secure encryptable SEEPROM.
•
Secure boot.
•
Real-time power monitoring.
•
Real-time voltage monitoring.
•
Real-time fan monitoring including airflow direction.
•
Real-time digital thermometers for temperature monitoring.
•
Real-time clock (RTC) with battery.
License Options
The Brocade G720 Switch uses a capacity-based Ports on Demand (POD) license method. Refer to the Brocade Fabric
OS Software Licensing Guide for more details.
Port-Side View of the Device
The following illustration shows the port-side view of the Brocade G720 Fibre Channel switch.
G720-Install-IG101
10
To Next Page
Loading...
