Broadcom Brocade G720 - Shipping Carton Contents

G720-Install-IG101 Installation Guide Brocade
®
G720 Switch Hardware Installation Guide
Task Task Details or Additional Information Completed
Optional: Configure the DNS service. Use the dnsconfig command to create DNS server entries. Refer to the
Brocade Fabric OS Administration Guide.
Optional: Customize the domain ID. Use the configure command to change the domain ID (default ID is 1). See
Setting the Domain ID for more information.
Verify that the device operates
correctly.
•
Check the LEDs to verify operation of functional parts. See Interpreting Port-
Side LEDs and Interpreting Nonport-Side LEDs.
•
The following commands can be useful to establish an operational baseline
for the device. Refer to the Brocade Fabric OS Command Reference
Manual for more information on these commands.
–
errdump
–
fanshow
–
historyshow
–
psshow
–
tempshow
Back up the configuration. Use the interactive configupload command to back up the configuration.
See Backing Up the Configuration for more information.
Optional: Power off the devices. Enter the shutdown command and wait for the device to power down,
and then unplug the power cords. See Powering Down the Device for more
information.
Shipping Carton Contents
When unpacking the device, verify that the contents of the shipping carton are complete. Save the shipping carton and
packaging in the event you need to return the shipment.
•
The Brocade switch
•
An accessory kit containing the following items:
–
RJ-45 to mini-USB adapter
–
Two 1.82m (6 ft) power cords
–
Optical transceivers
–
Rubber feet
–
RoHS hazardous toxic substance content chart
–
Download Instructions for Fibre Channel Networking Software and Documents
•
Inner foam
NOTE
Transceivers may be shipped in the accessory tray instead of installed in switch ports.
G720-Install-IG101
18
Broadcom